Refinish Hardwood Floors Without Sanding

Hardwood Floors

Refinishing hardwood floors without sanding is a great way to add life and beauty to any home. This method of refinishing is often used in older homes that have been neglected or damaged over time. Refinishing hardwood floors without sanding can bring back the original charm and look of the wood, while also adding additional protection from wear and tear.

The primary benefit of refinishing hardwood floors without sanding is time savings. Sanding can be labour-intensive, and it can take days to complete the process. Not only does this take up valuable time, but it also requires special tools and materials that can be costly. Refinishing without sanding eliminates these steps as well as the dust created during the process.

Another advantage of refinishing without sanding is that it’s more affordable than traditional methods. This type of floor refinishes typically only requires one coat of finish, rather than two or three coats needed with a more labour-intensive approach. It’s also possible to spot-treat areas with scratches or damage instead of completely redoing an entire room, making it much more cost-effective in many cases.

Finally, refinishing hardwood flooring in Edmonton gives a homeowner greater control over the final look of their floors. With no need for stripping or staining, homeowners are able to customize their new floor with whatever colours they choose rather than being stuck with what was previously there. This gives them more freedom when selecting colours and finishes for their home’s interior design scheme or just creating an entirely new look for their space!

Necessary Materials and Tools

Refinishing hardwood floors without sanding requires fewer materials and tools than traditional sanding methods. The primary items needed are a floor cleaner, a floor finish, and a soft cloth or mop. Floor cleaner is used to remove dirt and debris from the surface of the wood, while floor finish provides added protection that will help the wood last longer. A soft cloth or mop can be used to spread the cleaner and finish onto the floor evenly. Additionally, depending on the nature of any scratches or damage present in the wood, one may need to purchase additional items such as buffing pads or small brushes for spot treatments.

In terms of tools, all that is necessary for refinishing hardwood floors without sanding is a vacuum cleaner with an attachment hose and nozzle. Vacuuming is important for removing any dust created by cleaning off dirt and debris before applying the new finish. Also, if spot treatments are necessary, one may require more specialized tools such as sandpaper or electric buffers.

No matter what method is chosen for refinishing hardwood floors, it’s important to use only quality materials and tools in order to achieve optimal results that will last over time. With careful consideration of these factors when preparing to refinish hardwood floors without sanding, homeowners can reap all of the benefits this project has to offer without having to break out heavy-duty sanders!

Cleaning the Floor Surface

Cleaning the floor surface is essential for a successful hardwood refinishing project. Before beginning, it’s important to vacuum the entire surface with a hose and nozzle attachment. This will lift any dust and dirt that could potentially interfere with the finish being applied later on. After vacuuming, use a soft cloth or mop to evenly spread floor cleaner across the entire surface, allowing ample drying time afterwards. If there are any minor scratches or damage in the wood, buffing pads, sandpaper, or electric buffers can be used to gently remove them before applying the finish. 

Repairing Deep Scratches and Other Damage

Repairing deep scratches and other damage on your hardwood floors can be done without sanding. Depending on the severity of the damage, different methods can be used to repair it. For deep scratches, use wood putty or wood filler to fill in the scratch, then lightly sand over it with fine-grit sandpaper. For larger dents or gouges, you can use an electric sander to gently remove the damaged area and level out the surface. If there are any cracks in the floor, you can use a flexible epoxy adhesive to fill them in before refinishing. 

Removing Existing Sealants or Waxes

Removing existing sealants or waxes from your hardwood floors can be done without sanding, allowing you to quickly and easily refinish your floors. The first step is to remove any dirt and debris from the floor by vacuuming or sweeping it up. Then, use a soft cloth dampened with warm water to wipe down the floor. This will loosen any dirt particles that may have been lodged in the sealant or wax. Next, use a chemical stripper specifically designed for removing sealants or waxes to strip away the existing finish on your floor. Once this is complete, you can apply a new finish or sealant of your choice for a beautiful and long-lasting result!

Applying a New Coating of Finish

Once you’ve removed the existing sealant or wax from your hardwood floor, it’s time to apply a new coating of finish. Start by ensuring that your floors are clean and free of dust and debris. You can do this by vacuuming or sweeping the area. Then, use a soft cloth dampened with warm water to wipe down the floor. This will help remove any stubborn dirt particles that may have been lodged in the sealant or wax.

Once your floors are clean, you can begin applying the new coating finish. Depending on the type of finish you choose, there are a few different methods for application. For example, if you’re using a polyurethane-based finish, you’ll need to stir it thoroughly before applying it with either a brush or roller. Make sure to cover all areas evenly and allow ample time for drying between each coat. You may need to apply one or more coats depending on the type of finish you’re using and how much coverage is desired.

Choosing the Right Finish for Your Floor Type

When it comes to refinishing hardwood floors without sanding, selecting the right finish is key. Depending on your floor type, certain finishes can provide better protection and durability than others. For example, oil-based polyurethane finishes are ideal for high-traffic areas because they offer excellent protection against scratches and wear. Water-based polyurethane finishes are easier to clean up, but may not be as durable as the oil-based option.

If you have a maple wood floor, an acrylic urethane finish is ideal because it provides superior scratch resistance and a glossy look that will last for years. For oak or pine hardwoods, penetrating oils tend to work well due to their ability to penetrate into the grain of the wood. They also provide natural colour enhancement and do not leave behind a slick surface like other types of finishes.

No matter what type of floor you have, make sure you take the time to research your options before making a purchase. It’s best to select a finish that will provide long-lasting protection while also offering an attractive appearance that complements your interior design. 

Finishing Up

Once the new finish has been applied to your hardwood floors, it is time to finish up. Start by wiping the floors down with a damp mop or cloth to remove any excess dust or debris. Next, take an old towel and buff the entire surface until it is dry and smooth. For extra shine, use a floor wax product that is designed for hardwood surfaces. Lastly, put furniture back in place and enjoy your beautiful new floors! Finishing up your refinish process will only take you a few minutes and will leave you with stunning results that look like they have been sanded down.

Buffing the Entire Floor

After applying a glossy finish to your hardwood floors, you can use a 120-grit sanding screen to buff the entire surface. This will help create an even and glossy shine that will last longer than other finishes. To begin, attach the sanding screen to an electric sander or hand sander. Start in one corner and move in smooth, overlapping strokes along the length of the floor. Work your way across the room until the entire floor has been sanded. Once finished, vacuum up any dust or debris created by the sanding process and then use a damp cloth to wipe away any remaining particles. Finally, apply a finishing wax designed for hardwood surfaces to give your floors added protection and extra shine. This simple step will leave you with beautiful and long-lasting results that will make all your guests envious!


In conclusion, refinishing hardwood floors without sanding is possible with regular maintenance and preventative actions. Vacuuming and sweeping regularly will help keep dirt and debris from scratching the floor surface while using mild soap-based cleaners or water-based cleaners specifically designed for hardwood floors will keep the finish looking its best. Additionally, covering high-traffic areas with area rugs or mats can help protect your floors from everyday wear and tear. With a little care and attention, you can successfully refinish your hardwood floors without sanding.


You May Also Like

About the Author: admin

Leave a Reply

Your email address will not be published. Required fields are marked *